A Varmint Bench With A Twist

If you do much shooting in the Prairie Dog Towns out west, you need some type of shooting bench. I wanted a bench that had the following atributes:

Easy to carry
Cheap to build
Would allow use of a professional “benchrest” front rest.
Sturdy

The first requirement is all relative. As long as I can throw it on top of the Jeep or in the back of the Pick-Up, I’m a happy camper. I would set a cost of less than $200 for the second. The third specification took a bit of head scratching. And the last meant Three legs of a very sturdy nature with the seat not attached to the bench. Every bench I’ve tried with the seat attached had way to much movement for accurate distance shooting.

Here’s what I came up with:
P1060009-vi

P1060010-vi

As you can see, the whole top assembly swivels to the left and right along with your front rest. No mater how heavy your rifle and rest is, it just swings on a set of tiny wheels. Perfect! 

P1060001-vi

The bench uses three legs for utmost stability on uneven terrain. The front legs are available at any home improvement store and the rear leg is a custom made unit that allows elevation adjustment by moving the leg in and out and locking the pivot point.

P1060005-vi

The top moves on these little roller things. Very slick!

P1060004-vi

The rear pivot is simply a piece of pipe (in this case a piece of old rifle barrel)

P1060008-vi

And that’s it…………..

If you want a set of plans and a list of materials and the source, they are available

Email me at   RVB100@comcast.net   and I’ll get them out to you…………..

ADVERTISEMENT:

This web site is part of my income stream. If this article was helpful
to you, you might want to throw a few bucks at me via paypal
rvb100@comcast.net

Not necessary, but certainly appreciated!

If you have any questions, I can always be reached at  rvb100@comcast.net

Thanks

RoyB

Share this Article:

7 comments on “A Varmint Bench With A Twist”

  1. Pingback: Dream portable shooting bench - Page 3 - LongRangeHunting Online Magazine

  2. Pingback: Build a Swivel-Top Shooting Bench « Daily Bulletin

  3. Patrick Reply

    Somebody looking for a Ruger #1 7mm rem mag, Alexander Hamilton fore arm grip, maybe 1 box of ammo shot, excellent shape. Contact me

  4. Arthur W Bohms Reply

    I would like to have your magazine conversion done to my cz 527 rifle in 223 Remington

Leave A Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.