Off-Set Scope Mount I have a good shooting buddy that shoots extreme target rifles left handed. He recently lost the use of his left eye so I built a scope mount that allows the use of his right eye while shooting left handed.
Category Archives: Shooting
This is Mike Bellm’s on-line store and web site http://www.bellmtcs.com/store/index.php?cid=97
If you do much shooting in the Prairie Dog Towns out west, you need some type of shooting bench. I wanted a bench that had the following atributes: Easy to carry Cheap to build Would allow use of a professional “benchrest” front rest. Sturdy The first requirement is all relative. As long as I can
I did a quick series of photographs showing how to install a prefinished, Midway sourced, grip cap on the CZ American or the Cooper Model 21 Varminter. You can view it in the photo album under BANG or simply go here http://public.fotki.com/Rbertalotto/bang!/ ADVERTISEMENT: This web site is part of my income stream. If this article
A couple of years ago I got involved with brake development and experimentation. This was purely for my own edification. I’m just a hobbiest and needed something to do! I bought a brand new Savage 112 in 308 with laminated stock and SS fluted barrel to be used as a test bed. I threaded the
AHH, the Ruger #1! Not a finer production gun can be had for under $600. Period! Look at the wood Ruger uses. How about that hand cut checkering. Look at the blueing. This is Bill Ruger’s baby! You can’t bring one to the range without people going crazy over it! Put it in their hands.
There are 4: .300 BS, .308 Bellm, .308 Bellm #2, and .30 Bellm. (Only the .30 Bellm requires custom dies.). 300 BS (Bellm/Stewart) using .307 Win brass or .444 worked back to 2.025″ and .300 Savage dies. Basically same as parallel development by Don Bower, his .300 Super Bower, which is different from the .30
The following is taken from the sheet I send out with hammer extensions.It is a general warning about leaving the hammer resting on the firing pin with either the Contender or the Encore. It is for old timers and newbies alike. Failure to observe the following is what has caused at least one manufacturer to
Once again, “A great time was had by all!” This was my third PDC. As we did last year and the year before, my friend Paul Picard, drove up from Florida to Massachusetts and a few days later we headed west. This year we had a “new guy” with us. Another friend of ours, Paul
THIS IS SOMETHING EVERY T/C SHOOTER SHOULD TRY AT LEAST ONCE. IT IS AN EYE OPENER, ONE THAT WILL HELP YOU BETTER UNDERSTAND YOUR CONTENDERS AND ENCORES. Neck Size or Full Length Resize Cases?An Experiment Every Contender Shooter Should PerformThe purpose of this experiment is to demonstrate what happens to bottleneck cases fired at full