Contact Me

I like to discuss the varied aspects of precision target and varmint shooting. I write articles on precision rifles, single shot hand guns, and the care and feeding of them. I have been, reloading, and working with precision rifles and handguns for over ten years. Currently I'm working on a few projects which I will report on in the future.

* indicates required field
Share this Article:

19 comments on “Contact Me”

  2. Jerry J. Wolf Reply

    How do I get my shotguns too you to have the point of impact changed,to 60/40?

    • Roy Bertalotto

      Sorry…No can do. Only do work on my own firearms as I do not have an FFL. Any good shotgun smith should be able to help you.

    • Troy

      I would like to order 1 of your 17 caliber bore guides. Let me know what I need to do to get one shipped

    • Roy Bertalotto

      You can send me a check for $29.95 (personal check OK) or you can pay by PayPal ($29.95 to rvb100@comcast.net) This price includes shipping to the lower 48. (Canada is $29.95 + $37.00 shipping = $66.95) Anywhere else, send me an email with your shipping address and I’ll get back to you with a quote…

      The minute I receive funds the bore guide goes in the mail. You will receive it in two to three days.

      Read more about the bore guide here:

      http://rvbprecision.com/shooting/bore-guide-for-the-17hmr-rifle.html

      Send check to:
      Roy Bertalotto
      1 Country Club Blvd
      North Dartmouth, MA 02747

      Please let me know how you found out about our bore guides.

      Thanks
      Roy

  3. Serafin De armas Reply

    Hi Roy,do you recived my check for

    your bore guide ( savage 17 hmr) ?

  4. Howard Maynard Reply

    Hello,
    Do you take other forms of payment. I don’t use Pay Pal would like not to have to wait until you receive the check for you to ship.

    • Roy Bertalotto

      Hi Howard, I believe you are talking about the 17HMR Bore Guide? Just send me your shipping address and I’ll ship it out immediatly. You can send the check whenever you like. Thanks

    • Roy Bertalotto

      You can send me a check for $29.95 (personal check OK) or you can pay by PayPal ($29.95 to rvb100@comcast.net) This price includes shipping to the lower 48. (Canada is $29.95 + $37.00 shipping = $66.95) Anywhere else, send me an email with your shipping address and I’ll get back to you with a quote…

      The minute I receive funds the bore guide goes in the mail. You will receive it in two to three days.

      Read more about the bore guide here:

      http://rvbprecision.com/shooting/bore-guide-for-the-17hmr-rifle.html

      Send check to:
      Roy Bertalotto
      1 Country Club Blvd
      North Dartmouth, MA 02747

      Please let me know how you found out about our bore guides.

      Thanks
      Roy

  5. Eric gurney Reply

    What do I have to do to get the bore guide for my savage 93r17? Can I send a personal check then you send me the bore guide?

    • Roy Bertalotto

      You can send me a check for $29.95 (personal check OK) or you can pay by PayPal ($29.95 to rvb100@comcast.net) This price includes shipping to the lower 48. (Canada is $29.95 + $37.00 shipping = $66.95) Anywhere else, send me an email with your shipping address and I’ll get back to you with a quote…

      The minute I receive funds the bore guide goes in the mail. You will receive it in two to three days.

      Read more about the bore guide here:

      http://rvbprecision.com/shooting/bore-guide-for-the-17hmr-rifle.html

      Send check to:
      Roy Bertalotto
      1 Country Club Blvd
      North Dartmouth, MA 02747

      Please let me know how you found out about our bore guides.

      Thanks
      Roy

    • Roy Bertalotto

      I’m not sure as I’ve never been able to test it. I do know that a standard 5 round magazine will still fit and function in the modified trigger guard magazine well.

  7. jim knaub Reply

    Roy -Are you still doing the mag conversion on the cz 527 in 204 ruger? I am looking to buy one but I want to get rid of the ugly 5 rd mag it comes with. Let me know. Thanks Jim Knaub Mt.You can call me-406 859 3355 or send me your ph# skjk270@yahoo.com

  8. David Posson Reply

    Hi, I was just checking in to be sure you’re still doing the conversions for the 527 bottom metal.

Leave A Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.